Trojan 500 Series fast cure (4.8L kit)

USD $80.97

500 Series Epoxy Laminating Resin is a high performance epoxy based resin system, designed for wet layup and vacuum bagging applications and uses the most up to date chemistry available. Ideal for use in marine, fuel tanks anywhere where high chemical, corrosion and impact resistance is needed.

500 Series has three types of hardeners available;

  • 510 Series for fast cure times of 10minutes (5:1),
  • 520 Series standard cure time of 20minutes (5:1)
  • 530 Series with a slow cure time of 30minutes this hardener also is UV stabilised and has a crystal clear cure finish ideal for surfboard applications (3:1).

510 included with this kit!!!

 

PDF Downloads:

 

500 series Technical data sheet

 

Fiberglass and resin saftey facts

 

Mixing Guides

 

Read more
Add to wishlist

Description

500 Series Epoxy Laminating Resin is a high performance epoxy based resin system, designed for wet layup and vacuum bagging applications and uses the most up to date chemistry available. Ideal for use in marine, fuel tanks anywhere where high chemical, corrosion and impact resistance is needed.

500 Series has three types of hardeners available;

  • 510 Series for fast cure times of 10minutes (5:1),
  • 520 Series standard cure time of 20minutes (5:1)
  • 530 Series with a slow cure time of 30minutes this hardener also is UV stabilised and has a crystal clear cure finish ideal for surfboard applications (3:1).

510 included with this kit!!!

 

PDF Downloads:

 

500 series Technical data sheet

 

Fiberglass and resin saftey facts

 

Mixing Guides

 

Additional info

Availability: usually ships within 2 business days
Width: 25.00
Height: 25.00
Depth: 25.00
Shipping: Calculated at Checkout
Mix ratio by weight: 100:17
Mix ratio by volume: 100:20
Resin viscosity: 600 cps
Hardener viscosity: 170 cps
Mixed viscosity: 450 cps
Shelf life months: 36
Mixed colour: Light yellow
Mixed density: .96
Specific gravity cured: 1.18
pot life @25 deg c 100g/m Mass: 10 min
Barcol hardness 1 day: 80
Barcol hardness 1 week: 85
compression yeild 1 day: 10313
compression yeild 1 week: 11618
Tensile modulus PSI: 15000
Heat deflection temp deg c: 125
moisture absorbsion %: 2
glass transition: 38
flexural modulus: 3.4