New Vacuum bagging kit

USD $0.00

All these products and more are available in the Vacuum Bagging Products page

 

everything you need to vacuum bag your laminates

  • Place your fabric in the mould, and apply the mixed epoxy with a brush.
  • Put peel ply over the top of the wetted out fabric. (epoxy wont stick to peel ply)
  • Lay bleeder/breather fabric over the peel ply. (To absorb excess resin)
  • Place teflon connector where required.
  • cover with your vacuum bag, compleatly sealing with vacuum bagging tape.
  • put a small cut in your vacuum bag big enough for your vacuum tube to enter the teflon connector. Use vacuum bagging tape to seal the tube. 
  • Carefully pull a vacuum. Once at full vacuum you can use the line clamp to clamp the vacuum tube and turn the pump off.
Read more
Pump Size
Vacuum catch pot
(Flat) Vacuum Bag Length
(tube) Vacuum bag length
Peel ply Roll length
Bleeder breather Fabric Length
Preforated film roll length
Vacuum Bagging tape Qty
Teflon Connector Pack Size
Standard 6mm vacuum Tube Length
Line clamps
Brushes
Rollers
Add to wishlist

Description

All these products and more are available in the Vacuum Bagging Products page

 

everything you need to vacuum bag your laminates

  • Place your fabric in the mould, and apply the mixed epoxy with a brush.
  • Put peel ply over the top of the wetted out fabric. (epoxy wont stick to peel ply)
  • Lay bleeder/breather fabric over the peel ply. (To absorb excess resin)
  • Place teflon connector where required.
  • cover with your vacuum bag, compleatly sealing with vacuum bagging tape.
  • put a small cut in your vacuum bag big enough for your vacuum tube to enter the teflon connector. Use vacuum bagging tape to seal the tube. 
  • Carefully pull a vacuum. Once at full vacuum you can use the line clamp to clamp the vacuum tube and turn the pump off.

Additional info

Width: 1.00
Height: 1.00
Depth: 1.00
Shipping: Calculated at Checkout